News
Current Position： Home
> News
Working process and product quality of gas mold temperature controller
announcer：admin
During the operation of the gas mold temperature controller, its pump power is based on customer needs, and its control temperature accuracy is within ± 1 ℃, saving more than 30% of electricity. The internal pipeline stainless steel is integrally formed, the heat loss in the pipe is small, and the heating is uniform. The unique heating design of the pipeline explosion-proof device and temperature automatic control can quickly reach the temperature requirements of various products.
Production efficiency of gas mold temperature controller and guarantee product quality
The gas mold temperature rise and fall speed is fast, the temperature is uniform and stable, and the temperature of the automatic exhaust and oil return is displayed at startup. It is controlled by imported micro-electricity or PLC. The temperature accuracy can be controlled within ±1 degree to achieve automatic management. The set value and actual value are displayed separately.
When the gas mold temperature machine is used, it mainly combines the gas heat conduction oil boiler, the flue gas waste heat utilization device, the high level tank, the circulation pump, the combustion system, the PLC control system, the oil and gas separator, etc., and leaves the factory after assembly. After being delivered to the user's site, it can be used as long as it is connected to the gas, electricity, and thermal oil import and export. No special boiler room is required. Due to the one-key operation, no special furnace worker is required.
To a certain extent, the gas mold temperature controller is mainly used in the use of flue gas waste heat. When it is used, its equipment is comprehensively utilized in the gas heat conduction oil boiler 200 or more than 300 degrees high-temperature flue gas through the waste heat utilization device, and the flue gas temperature is only 75 It is about ℃, and the air entering the furnace through the burner to support combustion can reach more than 100 ℃. According to the measurement of users in many industries, the gas mold temperature machine can save more than 10% gas compared with the same specification of heat transfer oil boiler.
The equipment of the gas mold temperature controller is highly integrated, the system is simple, the resistance is small, the temperature can be controlled within ± 3 ℃, generally installed near the heating equipment, PLC control does not need to be on duty. Compared with the steam boiler of the same specification, it saves more than 30% gas, the energy saving benefit is very obvious, and the surface of the product is smooth. The high-pressure water descaling process is used twice in the process to ensure the smooth surface of the steel.